Pre-Amplifiers/Power Amplifiers

PBN Audio Custom Shop Amplifiers are manufactured in limited quantities by the makers of the World Famous MONTANA Loudspeakers

 

There are Three levels of Power Amplifiers as well as Three levels of Pre-Amplifiers.

Pre- Amplifiers:

Olympia L-Mini

 

An All-FET design with internal power supply (375VA Transformer
and 40.000 uF Capacitance). The L-Mini features 3 Balanced inputs, 2 RCA inputs and Balanced. RCA and 75 Ohm BNC outputs for use with our proprietary impedance matched interconnect system, Remote Control for volume and mute included.
US Retail $5,500.00

Olympia L

 

An All-FET design with external MPS power supply (375VA Transformer
and 80,000 uF Capacitance). The L features 3 Balanced inputs. 2 RCA inputs and balanced. RCA and 75 Ohm BNC outputs for use with our proprietary impedance matched interconnect system. The Olympia L also features limited use of Caddock Resistors. Remote Control for volume and mute included.
US Retail $12,000.00

Olympia LX

 

An All-FET design with external CPS power supply (2 ea 375VA
Transformer and 80.000 uF Capacitance, as well as 8 heavy duty filtering chokes for extremely precise and clean regulated supply current for the LX). The LX features 3 Balanced inputs, 2 RCA inputs and Balanced. RCA and 75 Ohm BNC outputs for use with our proprietary impedance matched interconnect system. The Olympia LX features extensive use of Caddock Resistors. Remote Control for volume and mute included.
US Retail $20,000,00

Power Amplifiers:

Olympia HT4

 

A 4 Channel MOS-FET power amplifier intended for Home Theater use.
but it is also very suitable for high quality 2 channel use (the 4 channels bridges into two fully differential channels with a whopping 400 Watts of power into an 8 Ohm load. The HT4 features a 1500 VA transformer and 200.000 uF of power supply capacitance. The HT4 is supplied with both Balanced and RCA inputs as well as one set of high quality 5 way binding posts per channel.
US Retail $5.500.00

Olympia-Mini

 

A superior 2 channel ALL-FET design utilizing a 1500 VA Transformer
and 200.000 uF of power supply capacitance. The Olympia-Mini produces 160 Watts of clean power into an 8 Ohm load per channel, which almost doubles into 4 Ohms. The Olympia-Mini features high quality onboard regulators for the voltage gain section. The current gain section features 8 pairs of very closely matched output devices per channel mounted on a PCB. Balanced, RCA and 75 Ohm BNC inputs are included in addition to 2 sets of WBT binding posts per channel. The Olympia-Mini can be bridged in differential mode where it will supply close to 600 watts into an 8 Ohm load. The Olympia-Mini must be driven with a fully differential pre-amplifier if used as a monoblock. High quality 20 Amp power cord included.
US Retail $8,500.00

Olympia-AX

 

A superior 2 channel ALL-FET design utilizing a 4000 VA Transformer
and 500,000 uF of power supply capacitance. The Olympia-AX produces 220 Watts of clean power into an 8 Ohm load per channel which almost doubles into a 4 Ohm load. The Olympia features high quality onboard regulators for the voltage gain section and extensive use of Caddock resistors. The current gain section features 10 pairs of very closely matched output devices per channel eliminating the use of source resistors for much improved sound quality. The output stage is mounted to solid 8 gauge copper bussbar for superior current handling capabilities. The AX features Balanced. RCA and 75 Ohm BNC inputs as well as 2 sets of WBT binding posts per channel. The AX can be bridged in differential mode where it will supply close to 800 watts into an 8 Ohm load. The Olympia-AX must be driven with a fully differential pre-amplifier if used as a mono-block. A high quality 20 Amp power cord is included.
US Retail $20,000.00